Inoveo3D

Inoveo3D Lab

3D Reconstruction

From a 2D floor plan or a few photos to a 3D space you can explore.

Interactive experience · no sound required

Inoveo3D Lab · R&D

3D Reconstruction : Two innovations, one ambition

Turning the simplest data, a floor plan or a few photos, into a structured, interactive and reusable 3D environment. The result of two years of research and development.

01Available on the platform

From 2D floor plan to 3D model

The plan is analysed, the volumes rebuilt and the interior furnished automatically. Then take control: overview, first-person free walk, or let the camera travel through the apartment room by room.

  • 2 to 5 minutes for an apartment
  • Automatically generated layout
  • Explored right in the browser
02On request · Partners

From photos to 3D reconstruction

Eight smartphone photos of a real living room with an open kitchen feed our reconstruction pipeline: shots placed back in space, point cloud, walls and openings detected, then the room's mesh. No scanner, no LiDAR sensor.

  • 8 smartphone photos
  • Floor, walls and openings detected
  • Rebuilt, editable room

Real apartment (Luxembourg) rebuilt by our R&D pipeline. The animation replays the steps; camera positions are illustrative and dimensions estimated.

Understand

3D reconstruction, in plain terms

3D reconstruction means producing a structured 3D model of a real home (walls, openings, volumes) from simple data. Inoveo3D does it in two ways: from a 2D floor plan, or from a few smartphone photos. Either way, the result is explored in a browser and stays editable.

From a 2D floor plan

Available on the platform

  1. 1You import the 2D floor plan of the apartment.
  2. 2Rooms are identified and volumes rebuilt with a deterministic geometric method.
  3. 3An interior layout is generated automatically, and you can customise it.
  4. 4The interactive 3D model is ready in 2 to 5 minutes for an apartment.

From photos

Research and development · partner access

  1. 13 to 9 smartphone photos per room, with no scanner and no LiDAR sensor.
  2. 2The shots are placed back in space, then a point cloud is computed.
  3. 3Walls, floor and openings are detected to obtain a consistent geometry.
  4. 4The room is meshed and textured: it becomes measurable and editable.

What we have measured

from 2D floor plan to interactive 3D model, for an apartment
2 to 5 min
smartphone photos per room for reconstruction from photos
3 to 9
median gap between rebuilt walls where photos cover them well (5 rooms tested)
0.4 to 1.3 cm
gap against a tape measure on a 20 m² room: a first measurement, not yet a statistic
3.4 to 3.8%

R&D results on real rooms, detailed in our study published on 27 October 2026.

Frequently asked questions

What is 3D reconstruction of a home?

It is the production of a structured 3D model of a real home, with its walls, openings and volumes, from simple data. Inoveo3D starts either from a 2D floor plan or from a few smartphone photos. The resulting model is explored in a browser and can be refurnished.

How long does it take to turn a 2D floor plan into a 3D model?

From 2 to 5 minutes for an apartment, once the 2D plan is imported on the Inoveo3D platform. The model can then be explored as an overview, as a first-person free walk, or as an automatic room-by-room tour.

How many photos are needed to rebuild a room in 3D?

Our tests use 3 to 9 smartphone photos per room. Coverage of the room matters more than the number of photos: 3 photos were enough for a 15.6 m² studio, but not for a 37.2 m² living room, which needed more viewpoints to cover every wall.

How accurate is reconstruction from photos?

Across 5 rooms tested, the median gap between rebuilt walls is 0.4 to 1.3 cm where photos cover them well. A first tape-measure check on a 20 m² room gives structural dimensions within 3.4-3.8% of the real measurement. It is a first data point, not yet a statistic.

Do you need a 3D scanner or a LiDAR sensor?

No. Reconstruction from a plan only needs the 2D floor plan. Reconstruction from photos uses ordinary smartphone photos, with no professional scanner and no LiDAR sensor.

Are these technologies available today?

Reconstruction from a 2D floor plan is available on the Inoveo3D platform. Reconstruction from photos is still in research and development: it is open on request to partners (networks, software vendors, developers).

Go further

Want to integrate these technologies?

Reconstruction from floor plans is available on the Inoveo3D platform. Reconstruction from photos is reserved for our partners: let's talk.